This problem has me really stumped. Would really appreciate more suggestions. I've run out of everything I know or have read to try. Just to let you know what I have tried thus far:Changing the middle cell to 100%.
Merging the left and middle cells, and trying width settings at 100%, or no width specified.
Inserting 1X1 pixel gif.
Not tried different size gif because don't know what size to try and whether it will negate the stretching of the cell.
Resetting alignment of jif's in right and left cells.
Resetting cell properties.
All changes have been made in properties, not by dragging cell walls.
The jif image placed in the left cell is 336 pixels wide and after inserting it from images the cell was 337 wide, so I specified a fixed pixel width for that cell of 337.
The jif image placed in the left cell is smaller than the width I want the cell to be so I used the defaults just to center the image in the cell while specifying cell width at what I wanted it to be.
Got to be a trick to all this that I am missing!
[This message has been edited by b. carey (edited 03-15-2001).]