|
Peter456 -> RE: Problems publishing "changed pages" (1/26/2007 14:26:16)
|
Hi Jaybee:
Thanks for your reply.
1.
Let's hope that, as you say, some people familiar with using FP to publish their web sites will be able to explain why FP is trying to publish 'all pages', rather than just 'changed pages'. This seems to be happening whether I ask FrontPage to do the publishing by comparing the pages OR by comparing the time stamps on the pages.
2.
I have discussed possible reasons for the uploads stopping with my host (FastHosts). Publishing does not always happen at the same time, which suggests to me that it is probably something rather more complex than a simple time or data limit. My speed of publishing seems fairly consistent at about 75Mb per hour. My publishing has been intrerrupted by the error message: "could not find web server ..." after I have published about275Mb, then after about 150Mb, then after about 110Mb then after about 175Mb.
My host (FastHosts) tells me that they do not have any time limits or data limits on uploads. However, they accept that I am having problems and in their last message to me, they said: "If you give us specific times as to when you get cut off, we can check the server logs to see if there is anything there that correllates with this. If that is the case, then you would need to find another method of publishing this."
I don't know how to interpret their final sentence. They have previously mentioned using FTP to publish, then 're-instating FP extensions' and doing 'recalc hyperlinks' on their servers. I'm not wanting to do that because on a previous occasion, I discovered that 're-installing FP extensions' for my site was 'timing out'. The host had to take down the whole site and it was out of action for about 3 days. Also, and I have found that 'recalc hyperlinks works well on my own PC but always 'times out' when I try it on the site held on FastHosts server.
- Peter
|
|
|
|
